You are currently browsing the tag archive for the ‘Craft’ tag.

Well, in my last post (nearly a year ago!!!) I promised that I would update again soon….oops!
I’m in the midst of uni life (exams and other stressful stuff) at the moment but thought I would at least post a pic for now ๐Ÿ™‚

I’m not making any promises this time, I’ve learned my lesson! Rest assured though, my love of felting has not dwindled in the slightest. Been to wonderwool and picked up a massive stash of goodies with which i will be experimenting as soon as time allows.
Anyway, time for the piccy – this was made last summer:

Hello!

I’ve made a nice little camera case. It’s been a few months in the making simply because, unlike wet felt, knitting doesn’t need to be finished in one go.

Needle felt close up

This design is echoed on the other side - as seen above

Another close up

This came about because my mum gave me her odd ball stash. I loved this wool (all I know is that is 100% wool) and the naturally dyed colours so decided to initially make a bag for a little girl. I didn’t follow a pattern (or bother with a tension square – I know I’m lazy ๐Ÿ˜‰ )ย  and didn’t cast on enough stitches so had to turn it into this camera case! It was a very good excuse for me to practice needle felting onto knitting as it isn’t something I’ve tried but have wanted to for ages. Next time I will be wet felting into knitting as I’m really excited to see what effects I’ll be able to achieve!

I used more natural fibres to needle felt into the knitting. I’m not sure what breed it is but it is naturally dyed roving. I would not use tops for this type of needlefelting because I reckon the extra ‘stabbing’ required would cause the knitting to pucker too much. Using roving minimises the amount of poking needed.

I still need to add a closure, and perhaps a lining (not sure yet). The closure will probably be a crocheted cord and a big button.

Good night all, sleep tight ๐Ÿ™‚

When I made the felt for lining my mum’s noro knitted bag I wasn’t very experienced and laid about 3 times too much fibre spread too thinly over too big an area, and too boot I underfulled it. I was worried and my expectations were right, it’s basically unfelted itself from daily use.

I never like to do 1/2 a job so was glad to get the chance to rectify my mistakes.

This is a tutorial for basic flat felt. I took a few photos of the process, and will explain the steps I forgot to photograph!

Fibres laid out

Work area: Table – the highest you can find, water proof table cloth, towel(s), bubble wrap. Lay these out in the order listed, with the bubble wrap bubble side up. You may also want to add a second layer of bubble wrap/plastic or netting to add over the fibres when wetting.

Laying fibres: I used merino and corriedale (which felts faster/more than merino in my experience) and laid 2 layers using 1 colour as a base 1/3 larger than I wanted the final fabric to be to allow for shrinking. I then added the coloured fibres in 3 seperate layers. I tried to lay these 3 layers out to ensure there were roughly equal amounts of fibres laid in all different directions to help the felt shrink as evenly as possible. If this is your first attempt I’d recommend laying an area about a 1/6 of the size of mine until you’ve got a feel for it.

Be mindful that it is best to lay only very wispy amounts and build up each layer gradually to help the fibres entangle and essentially felt into a better fabric. If you lay out big wadges of fibre they will not felt together easily and it will take a very long time to create anything useful! I laid areas of decoration on the top layers with big blocks of colour. Try to build these up rather than use one bigger amount of fibre again – it will save you time on the next, more time consuming, steps.

Fibres wetted with soapy water

Next I grated some soap (olive oil is often the feltmakers choice but I prefer ‘normal’ hand soap for some reason unknown to me…all I do know is that it has more suds) into some very hot water in the spray bottle. I added the soap to the water instead of the other way around to prevent too many suds at this stage. I then sprayed the fibres with with the nozzle set to a very fine mist, because I had no netting protecting the fibres from moving about. If you use netting you can dribble it a bit more liberally – if doing it my way be patient, it can take a while to get it fully wetted. Make sure the fibres are all wet and ‘stuck together’ but there should be no pools of water.

You can use a second layer of bubble wrap, bubble side down and gently rub your hand all over to spread the water evenly through the fibres. It helps if you spray this as your hands can glide over it.

More soap added as necessary, fibres rubbed

The photo above shows the felt starting to come together. By now if needed I have added more soap by rubbing the bar over the felt if it is covered in netting, or if not by covering my hands liberally in soap and rubbing and patting it into the felt, being mindful of the still fragile fibres. Then, whether using netting or bubble wrap to cover the felt, glide your hands all over the felt ‘sandwich’ using an even pressure. This will start the fibres entagling. Continue doing this until you can do the pinch test: can you pinch up a small amount of fibres to create a ‘tent’ effect that does not fall apart and feels and looks like a skin has been formed. It will look very different to the fibres when they had only been wetted out.

If your felt is cold now, as mine usually is, it’s a good idea to fold it up very gently (it is still fragile) and take it to a sink. Squeeze out the excess water and fill the sink with water as hot as you can stand. Place your prefelt (as your creation is known at this stage as it can be cut up and added into felt designs) into the water and saturate it. Then lift it gently and gently press out 95% of the water. Take the package back to your workstation, CAREFULLY unfold and re wet/soap with hot water if needed. You want the fibres to be wet and soapy still but not sopping.

Roll the parcel up

Next, replace the top layer (bubble wrap bubble side down or netting) and roll the whole bundle up into a sausage evenly. I roll the bubble wrap (& net if using) into a sausage first then roll the towel around that as I find it slips less. It is also a good idea to tie the bundle twice at 1/3 intervals to prevent slipping. Now, take the bundle and start rolling, using your hands first and moving to using your whole forearms. Roll this 100 times. If using netting stop and unroll the sausage, and lift the net gently every 50 rolls or so to ensure the fibres aren’t felting to it!). After 100 rolls unroll the sausage and turn the felt 90 degrees. Roll back up and roll 100 times. Unroll, turn felt over and turn 90 degrees roll up and roll 100 more times, unroll again, turn 90 degrees and roll 100 times.
Now unroll and inspect your felt more closely. You should pay attention to how much the felt is shrinking and how it seems to be a lot stronger/more entangled whilst you are rolling but now is the time to really inspect it. Has it shrink evenly? Are all the areas strong and well held together? Has it shrunk enough? Is it an even thickness? Is it thicker or thinner than you wanted? Pay attention to how your design and the nature of the fabric has changed with the process – this is the best way to learn how much fibre to use, how many layers to make, what fibre to use and how to lay your design out to achieve the best effects.

If your felt does not feel strong repeat the ‘reheating’ process and resoap, and reroll the parcel again until it is. If it does not feel strong at this stage you either laid your felt too thinly or unevenly or it simply hasn’t been felted enough – if it is the former keep it! You WILL find ways in the future to incorporate it into some exciting projects.

If any areas are not felted as well as others, spot full them. You may want to reheat it by immersing in hot water, you can be less gentle now and run it under the tap if you like. Resoap the area in question and rub with scrunched up bubble wrap, or against a washboard if you’re lucky enough to have one. Rub until the area seems as felted as you desire.

Felt drying after completing steps above and below

If your felt is strong, start gently pulling and stretching it. It seems counter-intuitive but helps the fibres to entangle more and the scales on them to lock together thus making it even stronger and more robust. It is also a good idea to throw your felt – you may want to reheat it by immersing in hot water, you can be less gentle now and run it under the tap if you like – and then gather up your felt randomly and throwing, hard, into the bath or onto your bubble wrap – it will get wet at this stage but it really helps the felt! Repeat all of the above a few times and then stretch into shape a final time. Run under the hot and cold taps alternately, pressing out excess water between temperature changes. Do this 3 times or until all the soap is completely removed. Pull into desired shape and leave flat to dry (I put mine on top of a towel on my radiator).

Finished felt close up

I hope it that the process is more clear with pictures, although as I’ve said before I’ve made a vow to take more pictures of all stages of the process so I can be more visual and less wordy when explaining what I’m doing.

Hello everyone ๐Ÿ™‚

Well the daffodils are out, the clocks have gone back…it must be spring!!

Another part of spring is Mothers Day.ย  This year I made her a bouquet ofย  poseable felted flowers and a needle felted sheep.

Here are some pics:

View 1

View 1

View 2

View 2

View 3

View 3

View 4

View 4

View 5

View 5

Ideally I would have taken pictures of each individual flower for my reference, and one of the sheep but oh well, I should be able to at the end of April when I’ll be staying with my Mum for Wonderwool ๐Ÿ™‚

The flowers were made in a variety of ways but have the same base structure. What I mean by this is that:

1. The stems were all created by making a cord/rope around some relatively tough craft wire which I have from my jewellery making. To be honest this was very tricky. I was able to make a nice tight rope and leave one ‘brush’ end dry (to attach the stem to the flower)ย  but the other end suffered because, despite being ‘folded’ so not pointy or sharp it kept poking through the non brush end and slipping down. I remedied this by needle felting when dry but it’s a technique I need to perfect.

2. The flowers consist of (with varying degrees of decoration using complimetary colours in different patterns):

i) Shaped single layer pieces of felt, some of which had we felted balls needle felted to the centre.

ii) Individually felted petals all with dry brush ends. These ends then felted together and into the brush end of the stem.

iii) Multiple layers of shaped (ie rounded etc) felt needle felted together (with or without wet felted ball attached with felting needle to the centre).

All the flowers were attached to stems by wet felting the brush end onto the flower. The flowers were laid face down onto my work space, and I held the stem vertically over the centre with one hand whilst felting and fulling with the other. When it was sufficiently well held together I gently turned the whole thing the right way up and rolled between my hands as I would for a cord near the end stages.

Conclusion:

This was an excellent experiment to do! I’m very pleased that I’ve managed to make a technique I conjured up myself (clever me ๐Ÿ˜‰ ) work this well. I would like to try using pipe cleaners instead of craft wire for the stems but they seem to be hard to find! I’m hoping this will help prevent the wool from slipping over the wire and allowing it to slip out of the supposedly enclosed end.

They do stand up on their own, despite being quite long. Yay! As well as being able to bend the stems, the petals are also poseable to a degree, so you can make the flowers look more or less open.ย  The opportunity to experiment so widely and freely with flower design and techniques was fanastic, I’ve loved making them since I started making felt and I’ve learnt some new techniques and tips for them.

I realise that it can often be difficult to understand written explanations unless you’re aware of the feltmaking processes so I will try my very best to photograph my projects as I go from step to step for anyone reading.

Finally, a belated wish to any Mother reading that she had a wonderful day on Mothering Sunday. You’re all wonderful ๐Ÿ™‚

So ages ago now I attempted a nuno scarf. I had read up briefly on it but just wanted to fling myself into it…definitely a learning curve!

Nuno Scarf 1

This picture was my first ever attempt. I layed wool on both sides of muslin fabric, but I reckon 1 much thinner layer would have worked better, as this one doesn’t drape fantastically well.

I got spurred on by the clear possibilities so made another ‘scarf’ with the intention of just experimenting. This is how that turned out:

Nuno Scarf 2 - side 1

And the 2nd half (only 1 side of the fabris ic felted but I had to photo it in 2 halves):

Nuno Scarf 2 - side 2

And finally, you can see how it drapes much better thanks to much less wool being used:

Nuno Scarf 2

I loved experimenting with different shapes, thicknesses and directions of laying the fibres. Doing the seperate ‘sections’ really gave me a good insight into how merino acts when nuno felted onto cotton muslin. It’s also a scarf that I’ve actually worn and enjoyed wearing. My first attempt is far too stiff so will await its future reincarnation into another experiment!

My Mum came to visit recently, so naturally I tried making some boot shaped wet felted slippers for her!

As with my last slippers they are merino inner and finn outer. These ones are embellished with merino multicoloured pencil roving and multicoloured silk throwsters waste.

Here they are:

Wet Felted Boot Slippers

My Mum's Slippers

I have just edited my tutorial regarding this, but if you’re making your own be aware that if you want the slippers to fit further up your legs than the ones pictured, be generous in your allowance for width shrinkage.

My Mum’s down for the weekend visiting, hence lots of woolly activities going on – as I write this she’s sewing one of my felt flowers onto one of her knitted and felted bags!

Anyway one of her friends from the knitting group she goes to has written this funny list, so I’m putting it on here – thanks Cas!

Reasons for buying lots of wool:

1. It keeps the shelf/storage box warm

2. It is our duty to support British farmers

3. It is less expensive and more fun the psychiatric care

4. It is useful for filling up all those empty spaces where dust may otherwise gather

5. A sudden outbreak of foot and mouth might mean a reduction in fleeces available for wool production

6. I am participating in a contest – the one who dies with the biggest stash wins

7. Stress relief from dealing with the Stash Control Officer (SCO, otherwise known as DH or Dear Husband)

8. It is not immoral, illegal or fattening. It calms the nerves, gratifies the soul and makes you feel good

9. Buy it now before your husband retires and goes shopping with you

10. It keeps without refrigeration; you don’t have to cook it to enjoy it. You never have to feed it or walk it

11. A ball a day keeps the doctor away

12. YOU DESERVE IT!

It put a big smile on my face, hope it does for you too. Have a good night everyone ๐Ÿ™‚